FIBARO FGD-212, Руководство по эксплуатации

Страница: 7 / 36

7
FIBARO BYPASS 2 (FGB-002)
#3: FIBARO Bypass 2 (FGB-002)
FIBARO Bypass 2 (FGB-002) is a device designed to work with FIBARO
Dimmer 2 (FGD-212). It should be used in case of connecting LED
bulbs or energy saving compact fluorescent lamps. FIBARO Bypass 2
prevents flickering of the LED lights and glowing of the turned off
compact fluorescent lamps.
In the case of 2-wire connection, FIBARO Bypass 2 allows to reduce
minimum power of load required by the Dimmer 2 for correct
operation. FGB-002 provides powering of the Dimmer 2 in case
of controlling the low loads of minimum power down to 5VA (for
cosφ>0.5).
Device installation:
1. Switch off the mains voltage (disable the fuse)
2. Connect the Bypass 2 in accordance with „Installation” on page 8
3. Follow the Dimmer 2 installation
4. Force the calibration procedure with FIBARO Bypass 2 using
RED menu position (see „Operating the device” on page 12) or
through setting parameter 13 to 2 (see „Advanced parameters” on
page 22)
Power supply:
Operational temperature:
Dimensions (L x W x H):
Power consumption:
100-240VAC 50/60 Hz
32-95°F (0-35°C)
1.22 x 0.6 x 0.51 inch
(31 x 21,6 x 13 mm)
< 1.4 W
Specifications:
CAUTION
In the case of 2-wire
connection do not
connect load below
minimal power with-
out FGB-002.
!
CAUTION
Dimmer 2 was de-
signed to work only
with FGB-002. Con-
necting other devices
may cause damage to
the Dimmer 2.
!
CAUTION
Bypass 2 works only
with Dimmer 2 in tra-
iling edge mode. Do
not connect the By-
pass to the Dimmer
operating in leading
edge mode.
!
CAUTION
Bypass 2 is sensitive
to the frequent chan-
ges of the state of
Dimmer 2 (alternate
switching on and off ).
Significant changes in
brightness should not
be performed more
than once per second.
!