22
ADVAnCED PARAMETERS
#13: Advanced parameters
Dimmer 2 allows to customize its operation to user’s needs. The set-
tings are available in the FIBARO interface as simple options that may
be chosen by selecting the appropriate box.
In order to configure FIBARO Dimmer 2 (using the Home Center con-
troller):
1. Go to the device options by clicking the icon:
2. Select the „Advanced” tab
GROUP 0 - The Dimmer 2 behavior - Basic functionalities
1.
Minimum brightness level
(parameter is set automatically during
the calibration process)
The parameter can be changed manually after the calibration.
Available settings:
1-98
- percentage level of brightness
Default setting:
1
Parameter size:
1
[byte]
2. Maximum brightness level
(parameter is set automatically during
the calibration process)
The parameter can be changed manually after the calibration.
Available settings:
2-99
- percentage level of brightness
Default setting:
99
Parameter size:
1
[byte]
3. Incandescence level of dimmable compact fluorescent lamps
Virtual value set as a percentage level between parameters MIn (1%)
and MAX. (99%). The Dimmer 2 will set to this value after first switch
on. It is required for warming up and switching dimmable compact
fluorescent lamps and certain types of light sources.
Available settings:
1-99
- percentage level of brightness
Default setting:
1
Parameter size:
1
[byte]
4. Incandescence time of dimmable compact fluorescent lamps
This parameter determines the time required for switching compact
fluorescent lamps and certain types of light sources. Setting this pa-
rameter to 0 will disable the incandescence functionality.
Available settings:
0-255
(0-25.5s)
Default setting:
0
Parameter size:
2
[bytes]
*
*
real scale
scale available
to the user
(virtual)
incandes-
cence level
of dimmable
compact fluo-
rescent lamps
min
max
0%
1%
99%
99%
CAUTION
The maximum
brightness level (pa-
rameter 2) must be
greater than the min-
imum brightness level
(parameter 1).
!
Содержание FGD-212
Страница 2: ......
