background image

16

 To prevent accidents, always remove the plug

from the power supply socket before carrying out any

maintenance or repair work on the machine! Do not use

compressed air to clean the electrical tool! Do not try to clean

parts inside the machine in this way, as you could let foreign

objects in through the openings of the machine housing.

 Certain cleaning agents and solvents are harmful

to plastic parts. Some of these are: gasoline, carbonyl chloride,

cleaning solutions containing chlorine, ammonia and

household cleaners containing ammonia. To assure the

circulation of air, the cool air vents in the motor housing must

always be kept clear and clean.

This unit is fitted with special, automatically disconnecting

carbon brushes. If these become worn, the current is

automatically switched off and the unit shuts down. In this

case, take the unit to an authorised Customer Service Centre

and have the carbon brushes changed.

Metalworking

If the device is used primarily for processing metals the inside

of the drive unit may become very dirty. Therefore the

following precautions are to be taken when processing metals

for safety reasons:

- connect a residual current operated device in series before

the tool,

- connect tool to a suitable dust extractor,

- clean tool regularly of dust accumulations in the motor

housing.

6

Accessories

Festool offers a wide range of accessories for the routers,

e.g. to make wooden joints or drill rows of holes.

Please refer to our main catalogue on the Internet under

“www.festool.com”. Where you will also find the extensive

range of cutters on offer for these tools.

7

Warranty

Conditions of 1+2 Warranty

You are entitled to a free extended warranty (1 year + 2

years = 3 years) for your Festool power tool. Festool shall be

responsible for all shipping costs during the first year of the

warranty. During the second and third year of the warranty

the customer is responsible for shipping the tool to Festool.

Festool will pay for return shipping to the customer using

UPS Ground Service. All warranty service is valid 3 years from

the date of purchase on your receipt or invoice.

Festool Limited Warranty

This warranty is valid on the pre-condition that the tool is

used and operated in compliance with the Festool operating

instructions. Festool warrants, only to the original consumer

purchaser, that the specified tool will be free from defects in

materials and workmanship for a term of one year from the

date of procurement. Festool makes no other warranty,

express or implied, for Festool portable power tools. No agent,

representative, distributor, dealer or employee of Festool has

the authority to increase or otherwise change the obligations

or limitations of this warranty. The obligations of Festool in

its sole discretion under this warranty shall be limited to the

repair or replacement of any Festool portable power tool that

is found to be defective as packaged with the User Manual.

Excluded from coverage under this warranty are: normal wear

and tear; damages caused by misuse, abuse or neglect;

damage caused by anything other than defects in material

and workmanship. This warranty does not apply to accessory

items such as circular saw blades, drill bits, router bits, jigsaw

Содержание 1010 EQ





















Отзывы: