Festo Smart cubic CPA-SC Series, Руководство пользователя

Страница: 33 / 136

1. Summary of components
1−17
Festo P.BE−CPASC−EN en 0412b
1.2.3 Ident. code of the pneumatic components
On the basis of the identification code, you can ascertain the
valve plates with which your CPA valve terminal or individual
location base block is fitted. This code is printed on the front
of the valve plate.
Ident. code Pneumatic components
B Valve plate with 5/3−way valve, mid−position pressurized
E Valve plate with 5/3−way valve, mid−position exhausted
G Valve plate with 5/3−way valve, mid−position blocked
I Valve plate with two 2/2−way valves, basic position blocked
With dual−pressure operation: Operating pressure via connections 1 or
connection 5
With vacuum operation: operating pressure via connection 1, vacuum at
connection 5 (e.g. for vacuum switching with reject pulse)
See also the instructions in the chapter 3.3 Pressure zone separation and 3.4
Vacuum/low pressure operation as well as in the appendix A.3 Overview of the
valve plates.
J Valve plate with 5/2−way double−solenoid valve
K Valve plate with two 3/2−way valves, basic position blocked
M Valve plate with 5/2−way single−solenoid valve
N Valve plate with two 3/2−way valves, basic position open
X Valve plate with 3/2−way valve, basic position closed, external pressure supply
(
not
intended in combination with the individual location base block).
Tab.1/12: Ident. code of the valve location components
Further information on the valve plates can be found in
appendix A.