Festo Smart cubic CPA-SC Series, Руководство пользователя

Страница: 51 / 136

2. Fitting
2−11
Festo P.BE−CPASC−EN en 0412b
2.3 CPA−SC individual location base block
The CPA−SC individual location base block should be mounted
on a wall if it is to be incorporated in a system or a machine.
Proceed as follows:
1. Make sure that the fastening surface can support the
CPA−SC individual location base block (weights see
appendix A).
Make sure that there is sufficient space for connecting the
supply lines and cables.
2. Drill two mounting holes in the fastening surface
(dimensions see figure).
1
Holes for horizontal fastening
Holes for vertical fastening
15.3
41 6.8
10
+
49.3
0.1
+
2.8
0.1
1
1
1
Mounting holes
Fig.2/3: CPA−SC individual location base block: Position of and distance between the
mounting holes
3. Fasten the CPA−SC individual location base block to the
fastening surface with two M3 screws of sufficient length
(tightening torque 1 Nm).