Festo Smart cubic CPA-SC Series, Руководство пользователя

Страница: 31 / 136

1. Summary of components
1−15
Festo P.BE−CPASC−EN en 0412b
The table below shows the max. number of valve locations on
the CPA−SC valve terminal variants:
CPA−SC valve terminal Max. number of valve locations
HC
connection
PI
connection
MP
connection
FL
connection
DI
connection
With the use of valve plates
which are each fitted with only
one valve solenoid coil.
1) 1)
20 20 24
2)
With the use of valve plates
which are each fitted with two
valve solenoid coils.
1) 1)
10 10 16
Maximum number of valve
solenoid coils which can be
controlled. 32 32 20 20 32
1)
On CPA−SC valve terminals with HC or PI connection the maximum number of valve locations is
limited by the base block to 16 locations.
2)
With this CPA−SC valve terminal with DI connection the first 8 vaalve locations support the
control of 2 valve solenoid coils. Further information on fitting equipment onto the valve terminal
can be found in the Electronics manual CPA−SC.
Tab.1/10: Maximum number of valve locations