Festo Smart cubic CPA-SC Series, Руководство пользователя

Страница: 111 / 136

5. Maintenance and conversion
5−13
Festo P.BE−CPASC−EN en 0412b
If only channel 1 is separated, the valve location, in
which the fixing pin is located, can be fitted with a
valve plate (in the example in VP 5). If, however, chan
nels 3 and 5 are separated, VP 5 must be fitted with a
blanking plate.
9. In order to mark the channel separation, clip an identifica
tion plate onto the relevant position in the base block.
Please note
Note that due to the separator element in the following
valve locations, the valve plates have up to 20 % less flow:
the valve location with the fixing pin
and the two neighbouring valve locations
(in the example VP4 and VP6).
Dismantling
1. Loosen the separator element (in Fig.5/2 position
4
)
with the hexagon socket wrench.
2. Remove the fixing pin (in Fig.5/2 position
5
) from the
base block.
3. Push the separator element out of the appropriate chan
nel of the base block.