Festo IFB11-03, Электронное руководство

Страница: 75 / 214

4. Commissioning
4−5
Festo P.BE−VIFB11−03−EN en 0503g
Calculating the number of inputs/outputs
Inputs
1. Number of 4−input modules ________ x 4
2. Number of 8−input modules ________ x 8
3. Number of 16−input modules ________ x 16
4. Number of other inputs, e.g. multi I/O module
5. The 4 status bits are assigned internally automatically by the valve terminal.
Σ Ι
+
Σ
I
Σ Ι
+
Σ Ι
+
+
4 I
Total number of inputs to be configured
=
Σ
I
Outputs
6. Number of single−solenoid sub−bases MIDI/MAXI ________ x 2
7. Number of double−solenoid sub−bases MIDI/MAXI ________ x 4
8. Number of type 04−B single−solenoid sub−bases
*)
________ x 1
9. Number of type 04−B double−solenoid sub−bases
*)
________ x 2
+
Σ Ο
+
Σ Ο
+
Σ Ο
Σ Ο
*)
Note the possible address reservations with type 04−B
Intermediate sum 6.9.
10.Check to see if the sum of 6. 9.
is divisible by four without remainder.
This check is necessary because of the 4−bit−orientated
internal addressing of the terminal.
The following distinction is made:
a) if divisible by four without remainder: continue with point 11.
b) If not: round up to the next half byte (+1...3).
11.Number of 4−output electric modules ________ x 4
12.Number of other outputs, e.g. multi I/O module
=
Σ Ο
+
2 O
+
Σ Ο
+
Σ
O
Total number of outputs to be configured
=
Σ Ο