Festo FB16, Электронное руководство, Страница: 124 / 190

4.3.2 Commissioning under ORPHEE (APRIL controllers)
Software version required
The configuration editor of ORPHEE permits the
configuration and commissioning of the field bus
slaves on the FIPIO-bus. Configuration of the
Festo valve terminals with FB16 requires a
version of ORPHEE
≥
V6.2.
The following sections describe the procedure
which permits the use of Festo valve terminals
on the APRIL-5000 controlled FIPIO-bus. More
detailed information on connecting and configur-
ing the field bus slaves on the FIPIO-bus can be
found in the appendix on the ORPHÉE docu-
mentation: "ORPHEE V6.2 /ORPHEE-DIAG” no.
TEM10000/10800F.
PLEASE NOTE
The software packages are subject to modifi-
cations which may not be taken into conside-
ration in this manual. Further and more up-to-
date instructions can be found in the manual
for the relevant software package.
Selecting the controller and the processor
Valve terminals can only be implemented with
CPU5030 or CPU5130, version
≥
2 (with integra-
ted FIPIO field bus module). The windows for the
field bus configuration are not accessible until
one of these processors has been selected.
VIFB16 - 03/05 4. Commissioning
4-42
0506b