Festo CTEU-DN, Описание, функции и обслуживание

Страница: 30 / 130

2. Installation and interfaces
2-8
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
2.2.3 Power supply connection
Power supply connec-
tion (M12, B-coded) Pin Assignment
1)
1
5
2
4
3
1 24 V
EL/SEN
(PS)
2 24 V
VAL/OUT
(PL)
3 0 V
EL/SEN
(PS)
4 0 V
OUT/VAL
(PL)
5 FU
2)
1)
V
EL/SEN
: Operating voltage for electronics/sensors
(Power System, PS)
V
OUT/VAL
: Load voltage for outputs/valves
(Power Load, PL)
FE: Earth terminal (functional earth)
2)
The connection to functional earth must be ensured via the
connected device or electrical connection box CAPC-...
Tab. 2/2: Power supply connection
For the connection to power supply units or the power supply,
use cables with M12 coupling (socket plug connector),
B-coded, in accordance with IEC 61076-2
Accessories www.festo.com/catalogue.
2.2.4 Functional test - no network connection
Check the operating status of the bus node using the status
LEDs
PS and X1 and/or X2 :
– The LED PS is illuminated green when the power supply is
present at both circuits.
– The LEDs X1 and/or X2 illuminate green when an I-port
device is connected.