Festo CTEU-DN, Описание, функции и обслуживание

Страница: 74 / 130

4. Commissioning
4-18
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
Attribute Access Name Type Description
1)
Class attributes
1
Get Revision UINT Revision of the object = 1
2 Get Max instance UINT Max. instance
2)
of the CIP object = 2
Instance attributes
2)
1 Get/Set Parameter byte 1 BYTE
2 Get/Set Parameter byte 2 BYTE
3 Get/Set Parameter byte 3 BYTE
4 Get/Set Parameter byte 4 BYTE
5 Get/Set Parameter byte 5 BYTE
6 Get/Set Parameter byte 6 BYTE
7 Get/Set Parameter byte 7 BYTE
8 Get/Set Parameter byte 8 BYTE
Note
Write access to these objects and instances is possible only if an I-port-compatible device is connec-
ted to the corresponding I-port.
1)
The specific contents (description, “parameters” and “values”) of the objects and instances
depend on the connected I-port device.
2)
Instance 1 refers to the module indentity of Device 1; Instance 2 to module indentity of Device 2.
Tab. 4/17: DeviceNet object relating to CTEU-DN for the device-specific parameterisation
(Festo parameter object) – Class code 106
d
Further information on parameter programming with a user
program (via explicit messaging) can be found in the data on
your controller.