Festo CTEU-DN, Описание, функции и обслуживание

Страница: 14 / 130

Contents and general safety instructions
XII
Festo P.BE-CTEU-DN-OP+MAINT-EN en 1206NH
The table below contains all the essential product and net-
work-specific terms and abbreviations that are used in this
description.
An overview of all terms and abbreviations can be found
in the Appendix A.2.
Abbreviation/term Significance
EDS Electronic Data Sheets contain product-specific data, e.g. the bus node
characteristics
see also “DCF” Appendix A.2
EDS library Manages the characteristics of the various fieldbus/network participants
Fail state Bus node function, also referred to as “fail safe” function; defines the
state assumed by outputs or valves following network or communication
errors, activates for example a reset of the outputs - or alternatively holds
the last state
I-port I-port is a Festo-specific interface for transmitting communication data
(process data, sensor signals, pilot signals) and supply voltages. The
I-port communication protocol is based on the IO link protocol. The elec-
trical and mechanical link between bus nodes and I-port device is stand-
ardised.
Object Directory Makes all important fieldbus/network participant parameters accessible
in a standardised manner
ODVA Open Device Vendor Association, DeviceNet umbrella organisation
PLC Programmable logic controller, also referred to as system controller or
controller for short
RSNetWorx Configuration, parameterisation, commissioning and diagnostics software
for DeviceNet from Rockwell Automation/Allen-Bradley
Tab. 0/1: System-specific terms and abbreviations (extract)