Ferris 5901879 Скачать руководство пользователя страница 52

Страница: 52 / 56

Not for

Reproduction

www.ferrismowers.com

ABOUT YOUR WARRANTY

Warranty service is available only through

Ferris

Authorized Service Dealers. This warranty only covers defects in materials

or workmanship. It does not cover damage caused by improper use or abuse, improper maintenance or repair, normal wear

and tear, or stale or unapproved fuel.

Improper Use and Abuse

- The proper, intended use of this product is described in the Operator's Manual. Using the product

in a way not described in the Operator's Manual or using the product after it has been damaged will not be covered under this

warranty. Warranty coverage will also not be provided if the serial number on the product has been removed or the product

has been altered or modified in any way, or if the product has evidence of abuse such as impact damage, or water/chemical

corrosion damage.

Improper Maintenance or Repair

- This product must be maintained according to the procedures and schedules provided in

the Operator's Manual, and serviced or repaired using genuine Briggs & Stratton parts or equivalent. Damage caused by lack

of maintenance or use of non-original or non-equivalent parts is not covered by warranty.

Normal Wear and Tear

- Like all mechanical devices, the unit is subject to wear even when properly maintained. This

warranty does not cover replacement or repairs when normal use has exhausted the life of a part or the equipment. Except as

noted in the warranty period, maintenance and wear items such as filters, belts, cutting blades, and brake pads (except engine

brake pads) are not covered by warranty due to wear characteristics alone, unless the cause is due to defects in material or

workmanship.

Stale or Unapproved Fuel

- In order to function correctly, this product requires fresh fuel that conforms to the criteria specified

in the Operator's Manual. Engine or equipment damage caused by stale fuel or the use of unapproved fuels (such as E15 or

E85 ethanol blends) is not covered by warranty.

Other Exclusions

- This warranty excludes damage due to accident, abuse, modifications, alterations, improper servicing,

freezing or chemical deterioration. Attachments or accessories that were not originally packaged with the product are also

excluded. This warranty does not include used, reconditioned, second-hand, or demonstration equipment or engines. This

warranty also excludes failures due to acts of God and other force majeure events beyond the manufacturer's control.

5419128 Revision -

Содержание 5901879

























































Результаты поиска

Содержание 5901879

Отзывы:

Похожие инструкции для 5901879

Бренды по названию

Популярные бренды

Ferris 5901879, Руководство оператора

Результаты поиска

Содержание 5901879

Отзывы:

Похожие инструкции для 5901879

Бренды по названию

Популярные бренды