Ferris 5901879 Скачать руководство пользователя страница 14

Страница: 14 / 56

Not for

Reproduction

www.ferrismowers.com

Decal, Warning, Roll Bar Removed

Part Number: 84008199

WARNING

Avoid serious

injury or death

from rollover.

• Do not operate without the roll bar

installed and operational.

Safety Decals and Icons (Export Models)

Read the safety decals before operating your unit. The

cautions and warnings are for your safety. Understand and

follow all safety decals to avoid a personal injury or damage

to the unit.

WARNING

If any safety decals become worn or damaged and

cannot be read, order replacement decals from your

local dealer.

Part Number: 5106565 - Decal, Main Safety

Part Number: 7106109 - Decal, Danger

Part Number: 5061246 - Decal, Pinch Point

Part Number: 5102456 - Decal, Fire

Part Number: 5061042 - Decal, Danger

Battery Safety Decal

Part Number: 5100536 - Decal, Safety, Roll Bar

Part Number: 5100685 - Decal, Safety, Overhead

Obstacles

Part Number: 5100537 - Decal, Warning, Roll Bar

5106565 - Decal, Main Safety

Warning:

Read and understand the

Operator’s Manual before using this

unit. Know the location and function

of all controls. Do not operate this

machine unless you are trained.

Warning:

Consult technical literature

before performing technical repairs

or maintenance. When leaving the

machine, shutoff engine, set the

parking brake to the lock position,

and remove the ignition key.

Danger - Amputation and

dismemberment hazard:

To avoid

injury from rotating blades and

moving parts, keep safety devices

(guards, shields and switches) in

place and working.

Danger - Loss of traction, sliding,

steering and control on slopes

hazard:

If machine stops forward

motion, stop the blades, and drive

slowly off the slope.

Danger - Amputation hazard:

not mow when children or others are

around. Never carry riders especially

children even with the blades off. Do

not mow in reverse unless absolutely

necessary. Look down and behind –

before and while backing.

Danger - Tipping and slipping

hazard:

Operating on slopes can

be hazardous and cause a loss

of control and roll-overs. Do not

operate on slopes over 15* degrees.

Avoid sudden turns or rapid speed

changes. Reduce speed and use

extreme caution on slopes. Avoid

turning down slopes; if possible,

turn up slopes. Do not operate

down slopes towards or near water,

retaining walls, or drop-offs. Give

yourself a minimum of two mower

widths of clearance around these

hazards.

Содержание 5901879

























































Результаты поиска

Содержание 5901879

Отзывы:

Похожие инструкции для 5901879

Бренды по названию

Популярные бренды

Ferris 5901879, Руководство оператора

Результаты поиска

Содержание 5901879

Отзывы:

Похожие инструкции для 5901879

Бренды по названию

Популярные бренды