Ferrari Portofino, Руководство пользователя

Страница: 142 / 208

142
ABOUT YOUR VEHICLE
By pressing button B you can activate/deactivate the electrochromic
mode. When the electrochromic mode is activated, the green LED D
comes on.
B
D
C
C
External rear-view mirrors
These mirrors can be electrically adjusted using the control C (with the
instrument panel activated, KEY-ON) and are equipped with defogging
elements.
1. Mirror selection: turn control C to the left or right lock position to
select the mirror that requires adjusting.
2. Mirror positioning: move control C in the four directions (up
–
down
–
right
–
left) to adjust the selected mirror.
3. Mirror closing: turn control C to the lower central lock position to
close the rear-view mirrors.
Once adjusted, move control C into the upper central position where
it will be locked in order to avoid changing the external mirror setting
inadvertently.
The mirrors will yield in both directions in the event of a collision: if
necessary, the mirrors can be pushed both backwards and forwards.
Every time the seat (see page 138)position is memorised, the external
rear-view mirror position is also stored automatically, both for the normal
direction of travel and for reversing.
To memorise a new position of the external rear-view mirrors, activate
the instrument panel (KEY-ON) and adjust the position of the mirrors;
then engage reverse and reposition the external mirrors to ensure the best
possible visibility to perform the manoeuvre, then disengage reverse gear.
Finally, press one of the H buttons (M1, M2 or M3, on the driver-side door
panel), each one corresponding to a memorisable position, until a double
tone confirms that the procedure is complete.
The new position of the external rear-view mirrors will be automatically
memorised together with the seat position.
In addition, the mirror positions can be adjusted for both the normal
direction of travel and for reversing.
Warning
The rear-view mirrors must always be positioned correctly while
driving.