Fermax DUOX RELAY Скачать руководство пользователя страница 59

Страница: 59 / 68

Page 59

Function confi guration.

First step: Confi gure the command and panel.

1. Press the

On/Off

button, the display will show the

Duox Relay

and

version.

2. Via the arrows we select the

1. COMMAND

menu and press

Ok.

3. Via the arrows we select the

AUTO ON

command and press

Ok.

Second step: Confi guration of the command´s origin (residence terminals).

The lock-release command, relative to the

residence terminals

sending them can be con-

fi gured as:

a) All installed terminals (ALL).
b) Terminals from a list (maximum 100 terminals).
c) Terminals included within a defi ned range (consecutive).

a) Confi guration: All installed terminals (ALL).

1. Via the arrows we select the

3. TERMINALS

menu and press

Ok.

2. Via the arrows we select

ALL

and press

Ok.

3. Upon turning the programmer off, the function is confi gured.

b) Confi guration: Terminals in a list (maximum 100 terminals).

1. Via the arrows we select the

3. TERMINALS

menu and press

Ok.

2. Via the arrows we select

LIST

and press

Ok.

3. Via the arrows we select the

3.2. TERM LIST

menu and press

Ok.

4. Via the arrows we select

ADD

and press

Ok.

5. Via the number buttons we enter the

address

of the terminal we want to add and press

Ok.

Notes:
- If you want to view the value entered for the address, select the 3.2 TERM LIST menu

and press Ok. Via the arrows we select LIST and press Ok.

- If we want to delete a terminal from the list, select the 3.2 TERM LIST menu. Via the

arrows we select ERASE

and press Ok. Via the arrows, select the terminal to delete

and press Ok.

6. Upon turning the programmer off, the function is confi gured.

Note:
- When the list is complete (100 terminals), the Relay On led fl ashes quickly.

c) Confi guration: Terminals included within a defi ned range (consecutive).

1. Via the arrows we select the

3. TERMINALS

menu and press

Ok.

2. Via the arrows we select

RANGE

and press

Ok.

3. Via the arrows we select the

3.1. RANGE START

menu and press

Ok.

Via the numeric keypad, enter the

fi rst address in the range

and press

Ok.

5. Via the arrows we select the

3.1. RANGE END

menu and press

Ok.

Via the numeric keypad, enter the

last address in the range

and press

Ok.

Note:
The last address should be greater than the fi rst one.

7. Upon turning the programmer off, the function is confi gured.

Содержание DUOX RELAY





































































Результаты поиска

Содержание DUOX RELAY

Отзывы:

Похожие инструкции для DUOX RELAY

Бренды по названию

Популярные бренды

Fermax DUOX RELAY, Руководство по установке

Результаты поиска

Содержание DUOX RELAY

Отзывы:

Похожие инструкции для DUOX RELAY

Бренды по названию

Популярные бренды