Page 45
3.3.1.6 ACTIVATE OR DEACTIVATE THE REMOTE RELAY FUNCTION
Function description.
* First operating mode:
You can activate or deactivate a second remote relay by activating the Set terminal (button
connected between the SET and - terminals), in the relay that we are confi guring.
For this, the second relay must be confi gured as described in section:
3.3.2 RX Operating Mode,
sec-
tion:
3.3.2.7 ACTIVATING OR DEACTIVATION OF RELAY UPON RECEIVING ACTIVATE/DEACTIVATE
COMMAND.
If the relay we are confi guring activates the Reset terminal (button connected between the RESET
and - terminals), the remote relay is deactivated.
By default, the Continued function is deactivated, so upon activating the
Set
terminal, the remote
relay is activated and the Reset terminal deactivates the remote relay.
Note: The time confi gured in the transmitter relay does not effect the receptor relay.
* Second operating mode:
Continued Mode (TOGGLE). If a relay in charge of activating the second remote relay we
activate Continued mode
(see:
3.2 CONFIGURATION OF ACTIVATION TIMES)
,
upon
activating the Set terminal on the fi rst relay, the second remote relay is activated and if the
Set terminal is deactivated or the Reset terminal on the fi rst relay is activated, the second
remote relay is deactivated.
TX
RX
3257
REF.
DISABLE
OUTPUT
12V 0.3A
SEC SINGLE
MIN ALL
OUT
NO
NC
C
RELAY
AV TRES CRUCES, 133
FERMAX ELECTRONICA, SAU
46017 VALENCIA - SPAIN
MADE IN SPAIN
BUS
OUTPUT
C
D
T
RX
PRG
MODULO RELE
DUOX
DUOX RELAY
MODULE
BUS INPUT
B
B
PRG
TX
B B
+12V
-
RESET/
SET
V
ON
3257
REF.
DISABLE
OUTPUT
12V 0.3A
SEC SINGLE
MIN ALL
OUT
NO
NC
C
RELAY
AV TRES CRUCES, 133
FERMAX ELECTRONICA, SAU
46017 VALENCIA - SPAIN
MADE IN SPAIN
BUS
OUTPUT
C
D
T
RX
PRG
MODULO RELE
DUOX
DUOX RELAY
MODULE
BUS INPUT
B
B
PRG
TX
B B
+12V
-
RESET/
SET
V
ON
DESTINATION
receptor relay
ORIGIN
transmitter relay
(confi gured as Activa-
tion or Deactivation
upon RECEIVING an
Activate or Deacti-
vate remote relay
command)
second
REMOTE relay
(the one being
confi gured as SEND
of the Activation or
Deactivation com-
mand on the remote
relay)
fi rst relay
Function confi guration.
1. Press the
On/Off
button, the display will show the
Duox Relay
and
version.
2. Via the arrows we select the
1. COMMAND
menu and press
Ok.
3. Via the arrows we select the
ACTIVATE RELAY
command and press
Ok.
4. The
REMOTE ADDRESS message appears
a) Via the number keypad enter the
relay’s block address
we want to activate
BL
and
the address
N
of
the destination relay
that must be between 0 and 999
b) If you press the arrows (up/down) we confi gure the
remote relay
as
GENERAL
ENTRANCE
.
To end press
Ok.
Содержание DUOX RELAY
Страница 1: ...DUOX RELAY advanced manual INSTALLATION MANUAL...
Страница 5: ...Page 5 Installation manual...
Страница 68: ...Avd Tres Cruces 133 46017 Valencia Spain...
