Fermax DUOX RELAY, Руководство по установке

Страница: 13 / 68

Page 13
2.5.1.4 ACTIVATE OR DEACTIVATE THE F1 RELAY FUNCTION
Function description.
* First operating mode:
You can activate or deactivate a second remote relay confi gured as F1 by activating the
Set terminal (button connected between the SET and - terminals), in the relay that we are
confi guring.
For this, the second relay must be confi gured as described in chapter: 2.5.2 RX Operat-
ing Mode, section: 2.5.2.5 ACTIVATING RELAY UPON RECEIVING ACTIVATE F1 RELAY
COMMAND.
If the relay we are confi guring activates the Reset terminal (button connected between the
RESET and - terminals), the remote relay confi gured as F1 is deactivated.
* Second operating mode:
Continued mode. If a relay in charge of activating the second remote relay we activate
Continued mode
(see: 2.4 CONFIGURATION OF ACTIVATION TIMES VIA THE
INTEGRATED PUSH BUTTONS (Sec/Single - Min/All) , upon activating the fi rst relay´s Set
terminal, the second remote relay confi gured as F1 is activated, and if the Set terminal is
deactivated or the Reset terminal on the fi rst relay is activated, the second F1 remote relay
is deactivated.
TX RX
3257
REF.
DISABLE
OUTPUT 12V 0.3A
SEC SINGLE
MIN ALL
OUT NO
NC
C
RELAY
AV TRES CRUCES, 133
FERMAX ELECTRONICA, SAU
46017 VALENCIA - SPAIN
MADE IN SPAIN
BUS
OUTPUT
C
D
T
RX
PRG
MODULO RELE
DUOX
DUOX RELAY
MODULE
BUS INPUT
B B
PRG
TX
B B
+12V
-
RESET/
SET
V
ON
3257
REF.
DISABLE
OUTPUT 12V 0.3A
SEC SINGLE
MIN ALL
OUT NO
NC
C
RELAY
AV TRES CRUCES, 133
FERMAX ELECTRONICA, SAU
46017 VALENCIA - SPAIN
MADE IN SPAIN
BUS
OUTPUT
C
D
T
RX
PRG
MODULO RELE
DUOX
DUOX RELAY
MODULE
BUS INPUT
B B
PRG
TX
B B
+12V
-
RESET/
SET
V
ON
DESTINATION
receptor relay
ORIGIN
transmitter relay
(confi gured as Activa-
tion or Deactivation
upon RECEIVING
an Activate F1 relay
command.
second
REMOTE relay
(the one being con-
fi gured as SEND of
the Activation or De-
activation command
on the F1 relay)
fi rst relay
Note:
- If you want to confi gure with the integrated buttons on the relay (Min/All - Sec/Single), you
need a telephone with auxiliary F1 confi gured to send an F1 command.
- If you do not have a telephone with auxiliary F1 function (ex. an Extra telephone),
you must do so with the Duox Programmer, see the corresponding chapter in Section
“3. CONFIGURATIONS - FUNCTIONS: PROGRAMMING WITH THE DUOX
PROGRAMMER”.