Fenix Imvico KS55 Series, Руководство по эксплуатации

Страница: 39 / 66

KS55 SERIES OPERATION MANUAL
GS ( A pL pH n m
[Name] Execute test print
[Format] ASCII GS ( A pL pH n m
Hex 1D 28 41 pL pH n m
Decimal 29 40 65 pL pH n m
[Range] ( pL + ( pH x 256)) = 2 (where pL = <02>H, pH = <00>H)
<00>H
≤
n
≤
<02>H, <30>H
≤
n
≤
<32>H
<01>H
≤
n
≤
<03>H, <31>H
≤
m
≤
<33>H
[Description]
●
Executes a test print with a specified test pattern on a specified paper.
●
pL , ph specifies ( pL +( ph x256)) for the number of the bytes after ph ( n and m ).
●
n specifies the paper to be tested.
n Paper
<00> / <30>H
<01> / <31>H
<02> / <32>H Paper roll
•
m specifies a test pattern.
m Test pattern
<01> / <31>H Hexadecimal dump
<02> / <32>H Printer status print
<03> / <33>H Rolling pattern print
[Notes]
●
This command has enabled only when processed at the beginning of a line.
●
After the test print is finished, the printer resets itself automatically. Therefore, data
already defined before this command is executed, such as user-defined buffer and
print buffer are cleared; and each setting returns to the default value.
●
The printer cuts the paper at the end of the test print.
G S ( C pL pH NULL 6 NULL C L R
[Name] Erase all logos
[Format] ASCII GS ( C pL pH NULL 6 NULL C L R
Hex 1D 28 43 pL pH 00 36 00 43 4C 52
Decimal 29 40 67 pL pH 00 54 00 67 76 82
[Range] pL = <06>H (fixed), pH = <00>H (fixed)
[Description] Erases all logos stored in non-volatile memory.
[Reference] FS p, FS q commands.
GS ( G n L n H m L m H
[Name] Set ticket length and cut offset related to black mark
[Format] ASCII GS ( G nL nH mL mH
Hex 1D 28 47 nL nH mL mH
[Range] 0
≤
( nL + nH x 256)
≤
65535
0
≤
( mL + mH x 256)
≤
65535
(where <00>H
≤
nL , nH , mL and mH
≤
<FF>H)
[Description] ( nL + nH x 256) specifies the total ticket length in dots (0.125 mm) and ( mL + mH x
256) sets the offset distance, also in dots, between the top of the black mark and the
next cutting line of the ticket in the paper feed direction (see section
BLACK MARK
SENSOR ).
[Notes]
●
Normally, the first ticket printed after powering up the printer must be discarded as it
will have different length that the following ones.
●
This command takes into account the distance from the black mark sensor and the
cutter blade which is fixed in a particular assembly. For this reason, this distance
must be kept if a different implementation is taken.
●
This parameters are saved in non-volatile memory.
[Default] ( nL + nH x 256) = 800 (100mm) ; ( mL + mH x 256) = 400 (50mm)
[Reference] GS FF, GS V, ESC i, ESC m
39 of 66