Fenix Imvico KS55 Series, Руководство по эксплуатации

Страница: 32 / 66

KS55 SERIES OPERATION MANUAL
ESC ! n
[Name] Select print mode(s)
[Format] ASCII ESC ! n
Hex 1B 21 n
Decimal 27 33 n
[Range] <00>H
≤
n
≤
<FF>H
[Description] Selects print mode(s) using n as follows:
Bit OFF/ON Hex Function
0
OFF 00 Character font A (12 x 24).
ON 01 Character font B (8 x 16).
1 -- -- Undefined.
2 -- -- Undefined.
3
OFF 00 Emphasized mode not selected.
ON 08 Emphasized mode selected.
4
OFF 00 Double-height mode not selected.
ON 10 Double-height mode selected.
5
OFF 00 Double-width mode not selected.
ON 20 Double-width mode selected.
6 -- -- Undefined.
7
OFF 00 Underline mode not selected.
ON 80 Underline mode selected.
[Notes] ● When both double-height and double-width modes are selected, quadruple-size
characters are printed.
●
When some characters in a line are double or more height, all the characters in the
line are aligned at the baseline.
● ESC E can also select the emphasized mode. Be careful when uses both command.
●
ESC M can also select character font type. However, the setting of the last received
command is effective.
●
GS ! can also select character size. However, the setting of the last received
command is effective.
●
If this command is not received at the beginning of a line, and the character font is to
be changed, all previous data in the print buffer is printed and the ticket is placed at
the beginning of the next line.
[Default] n = <00>H
[Reference] ESC M, ESC E, ESC G, GS !
ESC - n
[Name] Turns on/off underline mode
[Format] ASCII ESC - n
Hex 1B 2D n
Decimal 27 45 n
[Range] <00>H
≤
n
≤
<FF>H
[Description] Sets the underline mode. Only the least significant two bits are valid for n :
n = <00>H / <30>H : Underline mode is turned off.
n = <01>H / <31>H: Set the underline thickness to 1-dot.
n = <02>H / <32>H: Set the underline thickness to 2-dots.
[Notes] ESC ! command can turns off the underline mode.
[Default] n = <00>H
[Reference] ESC !
32 of 66