Fenix Imvico KS55 Series, Руководство по эксплуатации

Страница: 45 / 66

KS55 SERIES OPERATION MANUAL
First status sent ........................................ Last status sent
( status1 ) ................................................ ( status5 )
status1 = Transmit printer status
status2 = Transmit offline status
status3 = Transmit error status
status4 = Continuous paper sensor status
status5 = Paper sensor status
[Default] n = <30>H
[Reference] DEL EOT
GS f n
[Name] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] <00>H
≤
n
≤
<01>H, <30>H
≤
n
≤
<31>H
[Description] Selects a font for the HRI characters used when printing a bar code.
n selects a font from the following table:
n Font
<00>H / <30>H Font A (12x24)
<01>H / <31>H Font B (8x16)
[Notes] ● HRI indicates Human Readable Interpretation.
●
HRI characters are printed at the position specified by GS H.
●
HRI characters are always printed at X-Scale = 1 and Y-Scale = 1
[Default] n = <01>H
[Reference] GS H, GS k
GS h n
[Name] Select bar code height
[Format] ASCII GS h n
Hex 1D 68 n
Decimal 29 104 n
[Range] <01>H
≤
n
≤
<FF>H
[Description] Selects the height of the bar code.
n specifies the number of dots in the vertical direction ( n x 0.125mm).
[Default] n = <A2>H (162 dots  20,25mm)
[Reference] GS k
GS k m n d1...dn
[Name] Print bar code
[Format] ASCII GS k m n d 1... dn
Hex 1D 6B m n d 1... dn
Decimal 29 107 m n d1...dn
[Range] m = <43>H, m = <45>H, m = <46>H or m = <49>H
( n and d depend on the bar code system used).
[Description] Selects a bar code system and prints the bar code.
m selects a bar code system as follows:
45 of 66