Fenix Imvico KS55 Series, Руководство по эксплуатации

Страница: 55 / 66

KS55 SERIES OPERATION MANUAL
DC 3 P n
[Name] Presenter mode.
[Format] ASCII DC3 P n
Hex 13 50 n
Decimal 19 80 n
[Range] <00>H
≤
n
≤
<FF>H
[Description] Sets the ticket presentation mode and his collection mode, if ticket has not been
picked up.
n (hex)
n Hight nibble n Low nibble
Collection mode
(if ticket is not picked up)
Presentation mode
<00>H RETRACT SHORT + 2 nd Warning
<F0>H EJECT SHORT + 2 nd Warning
<01>H RETRACT SHORT
<F1>H EJECT SHORT
<02>H RETRACT LONG + 2 nd Warning
<F2>H EJECT LONG + 2 nd Warning
<03>H RETRACT LONG
<F3>H EJECT LONG
The SHORT option only shows the first 3 cm (approx.) of the ticket.
In the LONG option, the whole ticket is shown less the last 6 cm (approx.).
The 2 nd Warning option allows a second opportunity for the user to pick up the ticket
before it is collected (retracted or ejected). In the SHORT case, extract another 3cm of
ticket and resets the presenter collection time ( DC3 T n command) one again. In the
LONG case that second feed is not performed.
If finally the ticket is not picked up, an inward retraction or outward ejection action is
performed, depending on whether the RETRACT or EJECT option is selected,
respectively.
[Default] n = <F3>H.
[Notes]
•
This setting is saved in non volatile memory.
 If the RETRACT option is chosen, a receptacle must be provided in the printer
installation to store the tickets (see point “Outer case structure”).
•
If the EJECT option is chosen, the ticket will be ejected outwards, regardless of where
it may fail.
 If the option 2 nd Warning is included in the choice, the command DC3 D n ton toff
is active.
 The "2 nd Warning" option will not run for tickets with a length of less than 85 mm.
 FENIX IMVICO recmmends using the "LONG" option for tickets with a length
greater than 180 mm.
 This option can be tested or configured with our application FenixDemo.exe
(www.feniximvico.com).
[Reference] DC3 L n ton toff, DC3 D n ton toff
55 of 66