Fenix Imvico KS55 Series, Руководство по эксплуатации

Страница: 48 / 66

KS55 SERIES OPERATION MANUAL
●
xL , xH , select the number of data bytes ( xL + xH x 256) in the horizontal direction for
the bit image.
●
yL , yH , select the number of data bits ( yL + yH x 256) in the vertical direction for the
bit image.
[Notes]
●
This command is effective only when there is no data in the print buffer.
●
Data outside the printing area is read in and discarded on a byte-by-byte basis.
●
The position at which subsequent characters are to be printed for raster bit image is
specified by
GS L (Set left margin).
●
d indicates the bit-image data. Setting a bit to 1 prints a dot and setting it to 0 does
not print a dot.
[Example] When xL + xH x 256 = 64
GS w n
[Name] Set bar code width
[Format] ASCII GS w n
Hex 1D 77 n
Decimal 29 119 n
[Range] <02>H
≤
n
≤
<06>H
[Description] Sets the horizontal size of the bar code.
n specifies the bar code width as follows:
n
Module Width (mm) for
Multi-level Bar Code
Binary-level Bar Code
Thin element
width (mm)
Thick element
width (mm)
<02>H 0.282 0.282 0.706
<03>H 0.423 0.426 1.129
<04>H 0.564 0.564 1.411
<05>H 0.706 0.706 1.834
<06>H 0.847 0.847 2.258
Multi-level bar codes are JAN 13(EAN13), CODE 128.
Binary-level bar codes are ITF, CODE39.
[Default] n = <03>H
[Reference] GS k
FS p n m
[Name] Print NV bit image
[Format] ASCII FS p n m
Hex 1C 70 n m
Decimal 28 112 n m
[Range] <01>H
≤
n
≤
number of saved logo
<30>H
≤
m
≤
<33>H
[Description] Prints a NV bit image n using the mode specified by m .
m Mode
Vertical
Dot Density
Horizontal
Dot Density
<30>H Normal 203.2 dpi 203.2 dpi
<31>H Double-width 203.2 dpi 101.6 dpi
<32>H Double-height 101.6 dpi 203.2 dpi
<33>H Quadruple 101.6 dpi 101.6 dpi
[dpi: dots per 25.4 mm]
n is the number of the NV bit image.
m specifies the bit image mode.
48 of 66