KS55 SERIES OPERATION MANUAL
6 - CONTROL COMMANDS
LF
[Name]
Print and line feed
[Format]
ASCII
LF
Hex
0A
Decimal
10
[Description]
Prints the data in the print buffer and feeds one line, based on the current line spacing.
[Note]
This command sets the print position to the beginning of the line.
[Reference]
ESC 2, ESC 3
.
CR
[Name]
Print and carriage return
[Format]
ASCII
CR
Hex
0D
Decimal
13
[Description]
When automatic line feed is enabled, this command operates the same as
LF
; when
automatic line feed is disabled, this command is ignored.
[Notes]
●
This command is effective only it is programmed with such functionality (see
command
DC3 ESC FS GS
)
●
Sets the print starting position to the beginning of the line.
[Reference]
LF
DLE
EOT
n
[Name]
Real-time status transmission
[Format]
ASCII
DLE
EOT
n
Hex
10
04
n
Decimal
16
4
n
[Range]
<01>H
≤
n
≤
<04>H
[Description]
Transmits the selected printer status specified by
n
in real-time, according to the
following parameters:
n
= <01>H: Transmit printer status
n
= <02>H: Transmit offline status
n
= <03>H: Transmit error status
n
= <04>H: Continuous paper sensor status
n
= <05>H: Paper sensor status
[Notes]
●
The status is transmitted whenever the data sequence <10>H<04>H<
n
>
(<01>H
≤
n
≤
<05>H) is received.
●
The printer transmits the current status. Each status item is represented by one byte.
●
The printer transmits the status without confirming whether the host computer can
receive data (in serial interface).
●
The printer executes this command upon receiving it.
●
This command is executed even when the printer is offline, the receiver buffer is full,
or there is an error status with a serial interface model.
n
= <01>H: Printer status
Bit OFF/ON Function
0
OFF
Not used. Fixed to OFF
1
ON
Not used. Fixed to ON
2
OFF
Not Presenter jam
ON
Presenter jam
3
OFF
Online
27 of 66
