KS55 SERIES OPERATION MANUAL
DC3 ESC
FS GS
[Name]
Program printer settings
[Format]
ASCII
DC3
ESC
FS
GS
n
s1...sn
Hex
13
1B
1C
1D
n
s1...sn
Decimal
19
27
28
29
n
s1...sn
[Range]
<00>H
≤
n
≤
<07>H
[Description]
Changes any of the programmable settings and saves them into non-volatile memory.
Any of the settings can be programmed simultaneously with any other settings.
n
is the number of printer settings to be changed, and
s1...sn
indicates the type and
new value of the setting as follows:
[Notes]
●
Once the command has been sent the printer will save the new setting into non-
volatile memory and print a message indicating if the feature has been saved
successfully, or on the contrary if the feature is not supported. It is required,
therefore, to have the paper roll installed.
●
After this command has been executed, the printer will reset itself automatically in
order to activate new settings.
●
If communications setting are changed it will be required to change them also in the
host controller in order to re-establish communications.
Feature
s (high nibble) s (low nibble)
value
1- Paper width
0
1
60mm
2
80mm
-
-
2- Baudrate
1
0
9600 bauds
1
19200 bauds
2
38400 bauds
3
115200 bauds
4
230400 bauds
3- Parity
2
0
Odd parity
1
Even parity
2
No parity
4- Handshaking
3
0
Hardware
1
Xon/Xoff
2
No handshake
5- Cutter
4
0
No cutter
1
Total cut
2
Partial cut
3
Total/partial cut
6- Printing density
5
0
Normal
1
Light
2
Dark
7- Black Mark
6
0
Enable
1
Disable
30 of 66
