![background image](http://html1.mh-extra.com/html/feig-electronic/obid-i-scan-id-isc-pr101/obid-i-scan-id-isc-pr101_manual_3908001028.webp)
OBID i-scan
®
System-Manual
ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH
Page 28 of 131
H60301-3e-ID-B.doc
3.5. CFG4: Transponder Parameters
The parameters of the CFG4 configuration block contain general Transponder settings.
Byte
0
1
2
3
4
5
6
Contents
I-Code-
MODE
FAM-CODE
APP-ID
0x00
ISO 15693
MODE
ISO 15693
AFI
ISO 15693
OPTION
Default
0x00
0x00
0x00
0x0B
0x00
0x00
Byte
7
8
9
10
11
12
13
Contents
CUSTOMER
OPTION
0x00
0x00
0x00
0x00
0x00
ISO-Block-
size
Default
0x00
0x04
I-Code-MODE:
(only I-Code Transponder)
Bit:
7
6
5
4
3
2
1
0
Function
Mapping
0
0
0
0
0
0
0
Mapping:
b0:
FEIG Memory Model (default)
b1:
Original I-Code Memory Model
Note:
•
If Mapping is set to “original I-Code Memory Model” the ISO15693 Host Command
Read Config Block[0xA0] and Write Config Block [0xA1] will not be available.
To change the Config Block 0,1,2 can now be done with Write Multiple Blocks [0x24]
on the original I-Code Address 2,3,4.
FAM-CODE:
(only I-Code 1 Transponders)
Family Code to select a Transponder
APP-ID:
(only I-Code 1 Transponders)
Application ID to select a Transponder
Note:
If FAM-CODE and APP-ID are zero, all I-Code 1 Transponders will response. Otherwise only the
Transponders with matching FAM-CODE and APP-ID will respond.