![background image](http://html1.mh-extra.com/html/feig-electronic/obid-i-scan-id-isc-pr101/obid-i-scan-id-isc-pr101_manual_3908001103.webp)
OBID i-scan
®
System-Manual
ID ISC.MR/PR/PRH101
FEIG ELECTRONIC GmbH
Page 103 of 131
H60301-3e-ID-B.doc
•
*
If a MB89R118 Transponder is detected in reader field, the corresponding Fast Custom
Specific Commands can be used by the Reader. This depends on the settings of the Cus-
tomer Command Option Bytes (see:
3.10. CFG16: Customer Command Option Bytes
)
.
In details:
Used Command
Executed Fast Command, if enabled
[0x23] Read Multiple Blocks (max. 2 Blocks)
[0xC3] Fast Read Multiple Blocks (max. 2 Blocks)
[0x24] Write Multiple Blocks (max. 2 Blocks)
[0xC4] Fast Write Multiple Blocks (max. 2 Blocks)
[0xA1] Write EAS
[0xD1] Fast Write EAS
[0xA5] Read Multiple Blocks Unlimited
[0xD5] Fast Read Multiple Blocks Unlimited
Command
Number of Blocks
Single CMD
Multiple CMD
(max. 2 Blocks)
Multiple Unlimited
CMD
N = 1
-
√
-
N = 2
-
√
-
Read
N > 2
-
-
√
N = 1
-
√
-
N = 2
-
√
-
Write
N > 2
-
√
-
N = 1
√
-
-
N = 2
√
-
-
Lock
N > 2
√
-
-
Used Commands depends on the number of blocks
**
The WR-OPTION will be set automatically by the FEIG Readers if the RW-OPTION parameter
in “
3.5. CFG4: Transponder Parameters
” is set to “00: automatically set”. Up to two blocks
of data can be written for one request.