manualshive.com logo in svg

Feig Electronic OBID i-scan ID ISC.PR101, Руководство пользователя

Поделиться
Скачать
Feig Electronic OBID i-scan ID ISC.PR101 Скачать руководство пользователя страница 23

OBID i-scan

®

System-Manual

ID ISC.MR/PR/PRH101

FEIG ELECTRONIC GmbH

Page 23 of 131

H60301-3e-ID-B.doc

 

Note:

•

 

Changing of TRANS-FORM only becomes effective after writing / saving configura-

tion block CFG1 to EEPROM  and reset of the Reader.

•

 

Always 8 Data Bits and 1 Stop Bits should be used

•

 

Not available by the USB-Reader

ADVANCED MODE:

 

Bit:

 

7

 

6

 

5

 

4

 

3

 

2

 

1

 

0

 

Function:

 

0

 

0

 

0

 

0

 

0

 

0

 

0

 

Bit0

By setting this bit the Reader behaves like MR/PR/PRH100. On a request in normal mode the
readers response is also in normal mode.

Bit0:

b0:

reader automatically answers in advanced mode, if data length is longer

than 255 Byte.
b1:

reader always answers in normal mode. If there is data length longer than

255 Byte the reader sets MORE Byte.

TR-RESPONSE-TIME:

By means of this parameter the maximum duration for the Transponder command can be de-
fined.

The TR-RESPONSE-TIME starts after the Reader has received a new command. At the lat-
est after the TR-RESPONSE-TIME elapsed the Reader will send an answer protocol. In this
case, the current commands between Reader and Transponder are aborted. If this time is too
short the Interface Status “0x83 RF Communication Error“ will appear.

 

 

max. response duration

 

TR-RESPONSE-TIME

 

0...65535 * 100 ms

Note:

•

 

TR-RESPONSE-TIME has no effect with the protocols for Reader Configuration and

the protocols for Reader Control.

•

 

The TR-RESPONSE Time must be < “Block Timeout” in the Host COM-Port settings.

Содержание OBID i-scan ID ISC.PR101




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды