OBID i-scan
®
Installation
ID ISC.ANT1400/760-A/B/C
FEIG ELECTRONIC GmbH
Page 49 of 50
M50700-4e-ID-B.doc
•
Temperature range
– Operating
– Storage
–25°C to +50°C
–25°C to +70°C
Applicable Standards
•
RF approval
– Europe
– USA
EN 300 330
FCC Part 15
•
EMC
EN 301 489
•
Safety
– Low Voltage Directive
– Human Exposure
UL 60950-1
EN 50364
* Persistent deformation after load release approx. 0.5 cm.
** Qty. 2 ID ISC.ANT1400/760-A antennas, antenna spacing (antenna center), same flow direction,
Tag 46 mm x 75 mm ISO15693, sensitivity / minimum field strength H
min
=80 mA/m rms,
transmitting power 8 W, tag orientation parallel to antenna for horizontal movement through the
antenna. The detection performance also depending of the strength of the Transponder answer
signal !
*** Tag 46 mm x 75 mm ISO 15693, sensitivity / minimum field strength H
min
=80 mA/m rms,
transmitting power 8 W, aligned in all 3 dimensions for horizontal movement through the antenna.
The detection performance also depending of the strength of the Transponder answer signal !
**** Electrical data refer to the antenna with embedded reader and Multiplexer (Type C) respec-
tively Power Splitter (Type A).
.***** Operation
with 10 W is
currently
not in
all CEPT countries permitted ! See chapter 4.7
Configuring the Reader in accordance with national RF regulations!
