background image

 

 

Issue 05

Page

 1/20

Installation Guide for 3G Antennas

 

 
 

Installation Guide for 3G Antennas 

 

_________ 

 
 

Table of Content 

Section 1  -  Presentation....................................................................................................... 2 

Mounting accessory list..................................................................................................... 3 

Section 2  -  Accessories for antennas with pivot points at the back..................................... 4 

2.1 - Hardware for pole mounting (standard).................................................................... 4 
2.2 - Hardware for pole mounting (large).......................................................................... 6 
2.3 - Hardware for wall mounting...................................................................................... 8 
2.4 - Hardware for mechanical tilt ................................................................................... 10 
2.5 - Hardware for mechanical tilt on wall mounting (three mounting points version).... 11 

2.5.1 - Antennas with two mounting pivot points.......................................................11 
2.5.2 - Antennas with three mounting pivot points ....................................................12 

Section 3  -  Accessories for antennas with mounting plates at top and bottom ................. 13 

3.1 - Hardware for pole mounting (standard).................................................................. 13 
3.2 - Hardware for pole mounting (large)........................................................................ 14 
3.3 - Hardware for wall mounting.................................................................................... 15 
3.4 - Hardware for mechanical tilt ................................................................................... 17 
3.5 - Hardware for mechanical tilt on wall mounting....................................................... 18 

Section 4  -  Installation........................................................................................................ 19 

4.1 - General guidelines.................................................................................................. 19 
4.2 - Unpacking and checks............................................................................................ 19 
4.3 - Antenna installation ................................................................................................ 19 
4.4 - Maintenance ........................................................................................................... 20 

 

_________ 

 
 
 

Document history 

Issue Comments 

Date 

Issue 05 

Logo changed. Antennas type 5157120, 5231100, 5232100, 5230100, 
5121100 and 5178100 added. Changed photo section 4.3. 

09.09.2005 

Issue 04 

Antenna type 5142100 added (page 3) 

10.03.2005 

Issue 03 

Mechanical tilt for 5164100 is 0900415/00 instead of 0900412/00 
(pages 3 and 17) 

28.01.2005 

Issue 02 

Antenna type 5264100 and tilt hardware 0900250/00 added (page 3) 

24.12.2004 

Issue 01 

Previous separate guides have been grouped to cover all types of 
antennas in one document.  

29.10.2004 

 

Summary of Contents for 5157120





















Reviews: