Feider Machines FGHI3500RS, Руководство пользователя

Страница: 13 / 32


Pull outward the throttle cable.

Pull the handle until your feel resistance, then pull the handle as the direction of the arrow shown
below to start the generator.
BE CAUTIOUS

Never allow the starting handle to rebound. Slowly put it back.

When pulling the cable, hold the generator tightly to prevent the generator from overturning.

After the generator is started, preheat the generator, then push the throttle cable back to the
“OPEN” position.
Working at high altitudes
In high altitude areas, the air-fuel mix in a standard carburetor is relatively thick, so the engine
operating performance will reduce, while the fuel consumption increases. At this point you can
adjust the main jet on the carburetor (smaller), while adjusting the ratio-mixing screw, then you can
change the performance of the engine in high altitude areas. If you are always using the generator
at an altitude of 1500 meters or above, please let a BUILDER SAS authorized agent modify the
carburetor.
Even with the appropriate main jet, the engine power will still drop by 3.5% as altitude increases
every 305 meters. If you do not make these adjustments, the impact of altitude on the power will be
greater.
13