Feider Machines FGHI3500RS, Руководство пользователя

Страница: 22 / 32


If the insulator has been ruptured, it must be scrapped. If you want
to use the spark plug again, use a brush to clean the spark plug.

Measure the spark plug clearance with a feeler gauge, and the
spark plug clearance should be 0.6-0.7mm (0.024-0.028 in)

Install the spark plug carefully. Be careful of the thread dislocation.

After installing a new spark plug, tighten it about 1/2 turn around
with a wrench and press the gasket back. If it is a used spark plug
that still works well after inspection, tighten it with a wrench about
1/4 to 1/8 turn around with a wrench after relocating

Reinstall the ignition coil.
BE CAUTIOUS

The spark plug must be firmly installed, otherwise the spark plug will become too hot and
damage the generator

Do not use the spark plug with different heat value.
Maintenance of Muffler & Fireproof Net
Dirty muffler will affect the effect of the generator and the power of the engine. To ensure the normal
operation of the generator, please clean up the muffler fireproof net regularly. If you use the
generator in a particularly dirty place, you need to clean it up frequently. Replace the muffler
fireproof net if necessary.
BE CAUTIOUS

You must shut off the generator to clean the muffler fireproof net.

Make sure the engine is shut down, otherwise the high-temperature muffler might cause
burns.
 Remove the outlet cover plate screws, open the outlet cover plate.

Remove 2 screws on the muffler fireproof net.
 Remove the muffler fireproof net as the direction on the picture followed.

Take out and check the fireproof net. Clean or replace the fireproof net if necessary.

Clean or replace the fireproof net and then follow the opposite action to install the outlet cover
plate back.
22