Federal Signal Corporation UltraVoice UVIC, Описание, Технические характеристики, Установка, Эксплуатация и Руководство по обслуживанию

Страница: 56 / 70

56
Operations
UltraVoice Indoor Controller (UVIC)
Table 41 Remote Activation Connections (JP14)
JP14 Terminal Function
1—COM
Common
2—F1 F1—Activates functions 1
3—F2 F2
—
Activates functions 2
4—F3 F3
—
Activates functions 3
5—F4 F4
—
Activates functions 4
6—F5 F5
—
Activates functions 5
7—F6 F6
—
Activates functions 6
8—F7 F7
—
Activates functions 7
9—F8 F8 — Activates functions 8
10—COM Common (Reset)
Sensor Inputs (JP15)
Terminal block JP15 is located at the bottom of the backplane motherboard. Use sensor
inputs to detect and notify conditions occurring at an RTU location.
Table 42 Sensor Connections (JP15)
JP15 Terminal Function
1—COM Common
2—SPR #1 Spare #1
3—COM Common
4—INTR Intrusion
5—COM Common
6—SOL Solar
7—COM Common
8—AC AC Power
9—COM Common
10—600 PTT 600 PTT
11—COM Common
12—SPR #2 Spare #2
Spare 1 and 2 (JP15: pins 1 and 2)
Use for user-defined application.
Intrusion (JP15: pins 3 and 4)
Alerts the controller when one of the unit’s doors has been opened. Low is intrusion pass.
Solar (JP15: pins 5 and 6)
Use to sense operation of solar power system.
Jumper JP15: pins 5 and 6 when using solar. This jumper enables solar mode, which
causes the system not to report a failure during low-light conditions or at nighttime. This
is done by locking in a power pass until a master reset. For solar panel testing during the
day, initiate a master reset, wait 15 seconds, and then poll.