Federal Signal Corporation UltraVoice UVIC, Описание, Технические характеристики, Установка, Эксплуатация и Руководство по обслуживанию

Страница: 25 / 70

25
Installation
Description, Specifications, Installation, Operation, and Service Manual
6. After the cabinet is securely mounted, remove any debris that may have entered the
cabinet. Remove the two battery hold-down brackets on the bottom right side of the
enclosure. Install the batteries oriented as shown in Figure 5, but do not connect any
wires to the batteries. Re-install the battery hold-down brackets over the batteries.
Figure 4 UVIC Battery Connections
CHGR
CHGR
7. If the UVIC model being installed has a two-way radio, ensure the radio power
switch is turned off until all wiring is completed to avoid damaging the radio.
UVIC Installation Material List and Installation Guidelines
The following material lists and guidelines describe basic installation details required to
install the UVIC cabinet. This list varies depending on mounting methods, other options,
local and national electrical codes. Use lists as a reference guide only.
Table 21 Installer Supplied UVIC Electrical Installation Material List
Material Description Purpose Qty
30 amp/250V/ 2 Pole Solid Neutral/
Fused Disconnect with Ground Kit/
NEMA 1 Rating/ Lockable Cover
Tang/ Lockable Operator
Optional Electrical Disconnect 1
15 A FRNR Fuse Fuses for 120 V Service 1
10 A FRNR Fuse Fuses for 240 V Service 2
12-14 AWG White Wire AC Neutral from disconnect 8 ft
12-14 AWG Black Wire AC Load from disconnect 8 ft
12-14 AWG Green Wire Equipment ground from disconnect 8 ft