Federal Signal Corporation UltraVoice UVIC, Описание, Технические характеристики, Установка, Эксплуатация и Руководство по обслуживанию

Страница: 16 / 70

16
Specifications
UltraVoice Indoor Controller (UVIC)
UVIC
Accessories/
Part Numbers
Description
UVIC25ST Step-down transformer, 70-25 V
rms
(UV25ST with custom cable)
ENWSSPA Wall-mounted speaker strobe
ENWSTPA Wall-mounted strobe
ENCSTA Ceiling-mounted strobe
DSA1 100-watt speaker
Table 3 Ordering UVLOC and UVLOC-IM
UVLOC
Part Numbers
Description
UVLOC Maximum of (10) units can be interfaced to a UltraVoice Siren
Controller (UV) or UltraVoice Indoor Controller (UVIC)
UVLOC-IM One (1) Interface module must be ordered per UV or UVIC
Specifications
Specifications for the UVIC
Table 4 Electrical for the UVIC
AC Input Voltage 120 or 240 Vac (UVIC240) +/- 10%
50-60 Hz* Single-phase
(*two separate models)
AC Input Current 5 amps AC
Operating Voltage 24 Vdc
Continuous Signaling Time 30 minutes
Table 5 Battery
Battery Input Voltage 20-28 Vdc, 27 Volts
Battery Current 120 mA standby current, up to 22 A for each amplifier
module running, 50 amps
Battery Capacity > 45 minutes continuous operation without AC power
Standby Time > 72 hours (3 days) including two-way radio
(with 5-minute full signal reserve minimum)
Type VRLA
Rating 44 A/H minimum
Table 6 Environmental
Operating Temperature -22°F to 149°F/-30°C to +65°C
Humidity 0-98% non-condensing
NOTE
• The UVIC can operate throughout this temperature range provided the battery
temperature is maintained at -18°C/-0.4°F or higher.
• The UVIC housing carries a NEMA 1 rating.