Preparing to Program the Control Pad
19
SmartSiren Platinum Series
CONTROL PAD DAMAGE
To avoid damage to the control pad, do not plug the Federal Signal serial cable into
the computer programming port on the control pad labeled PC CONNECT ONLY.
6.
Plug the connector of the orange Ethernet crossover cable into the computer programming port
on the side of the control pad.
ORANGE
ETHERNET CABLE
(P/N
751532)
PROGRAMMING
PORT ON
CONTROL PAD
7.
Plug the other end of the cable into the RJ-485 Ethernet connector on your computer.
ORANGE ETHERNET CABLE
(P/N 1751532)
ETHERNET
(RS-485) PORT
NO
TE
The control pad must be connected to 12 Vdc
To establish the Ethernet connection in the next step, the control pad must be
wired for 12 Vdc power. For connection instructions, refer to the
SmartSiren
Platinum Installation, Maintenance, and Service
manual, document number
2562502 or the
Quick Connect Guide
,
document number 2562417.
Содержание SmartSiren Platinum Series
Страница 1: ...Control Pad Configuration Software Manual 2562418C REV C 411 Printed in U S A...
Страница 6: ...6...