![background image](http://html1.mh-extra.com/html/federal-signal-corporation/smartsiren-platinum-series/smartsiren-platinum-series_software-manual_3807149015.webp)
Preparing to Program the Control Pad
15
SmartSiren Platinum Series
6.
Plug the other end of the cable into the RJ-485 Ethernet connector on your computer.
ORANGE ETHERNET CABLE
(P/N 1751532)
ETHERNET
(RS-485) PORT
NO
TE
The control pad must be connected to 12 Vdc
To establish the Ethernet connection in the next step, the control pad must be
wired for 12 Vdc power. For connection instructions, refer to the
SmartSiren
Platinum Installation, Maintenance, and Service
manual, document number
2562502 or the
Quick Connect Guide
,
document number 2562417.
7.
Set up the control pad for programming by putting it into Program Mode:
a)
Press and hold
Button 6
while powering up the control pad.
6
b)
During the long beep, release
Button 6
.
c)
Press
Button 6
again. The first LED on the control pad lights to indicate you are in
Programming Mode.
Содержание SmartSiren Platinum Series
Страница 1: ...Control Pad Configuration Software Manual 2562418C REV C 411 Printed in U S A...
Страница 6: ...6...