![background image](http://html1.mh-extra.com/html/federal-signal-corporation/smartsiren-platinum-series/smartsiren-platinum-series_software-manual_3807149069.webp)
Configuring the Siren
69
SmartSiren Platinum Series
Siren Functions: Buttons 1–15
Function
Description
Wail
Continuous wailing up-and-down tone.
Wail Coast Down
Wail tone that falls in frequency after the tone is turned off.
Yelp
Continuous rapid warbling tone.
Yelp Coast Down
Rapid warbling tone that falls in frequency after the tone is turned off.
Priority
Continuous rapid yelp tone.
High/Low
Distinctive two-tone sound.
Radio
Incoming radio messages are amplified by the siren and rebroadcast
over the siren speaker.
Standby
Turns off all siren tones, except
Air Horn
and
Manual
. Standby is
available with
Buttons 1
and
6
.
Air Horn
A traffic-clearing loud blast of sound.
Manual
Peak-and-wail tone.
Function
Description
On Power-Up
Each press of the horn button steps through a siren tone—
Wail
, then
Yelp
, and finally
Priority
—until the fourth press
turns off the siren tone.
Siren Dependent Disable
Turns off the
Siren Dependent Enable
, which restricts siren
activation to a slide switch position.
Siren Control: Buttons 1–15
Function
Description
Horn Ring On Power-Up
Turns on the Horn Ring Transfer function when the SmartSiren
Platinum system is powered up.
Siren Control: Horn Ring
Содержание SmartSiren Platinum Series
Страница 1: ...Control Pad Configuration Software Manual 2562418C REV C 411 Printed in U S A...
Страница 6: ...6...