
Exploring the Interface
28
SmartSiren Platinum Series
Escape Button
When you click a button in the
Button Control Module
for the first time,
the legend
Esc
on the
Escape
button in the upper right corner of the
Device
Selection Module
changes from gray to green. The change in color lets you
know that the pane is active and ready for your selections.
The
Escape
button enables you to cancel your changes in
a pane while returning you to the
Lightbar Pane
. You can
also use the button to deselect default settings or your saved
settings in a pane with one click.
To cancel your changes in a pane after clicking the
Escape
button, click
OK
in the
Saving Button Configuration
pop-up.
To keep your selections, click
Cancel
or the
X
in the popup.
The Button Control Module
The
Button Control Module
enables you to select how a button operates when pressed. See also
“Button Control Capabilities” on page 31.
•
as a
Momentary
button that turns on a function when pressed and held, and turns off the
function when released.
•
as a
Push On/Off
button that turns on a function when
pressed and turns off the function when pressed again.
•
as an
Exclusive
button that turns on a function when
pressed and turns off the button that was pressed
previously in the same row.
•
as a
Security Timer
that requires the sequential press of
two buttons to turn on a function that turns off after a set
duration. The first button, which is the
Security Timer
,
must be selected from the buttons with the capability
shown in the table on page 31. The drop-down list of timer
durations has a choice of 4, 8, 12, 16, and 20 seconds.
To turn on the security timer,
Button 14
, which is the
second “enable” button, must be pressed within 4 seconds
after the first button is pressed. If
Button 14
controls
another function, such as a lightbar flash pattern, a second
press of
Button 14
turns on the function.
To turn off the
Security Timer
, press the first button again or let it time out.
•
as a
Timer
with a set duration for a function to stay on. The durations are the same as for the
Security Timer
.
Содержание SmartSiren Platinum Series
Страница 1: ...Control Pad Configuration Software Manual 2562418C REV C 411 Printed in U S A...
Страница 6: ...6...