![background image](http://html1.mh-extra.com/html/federal-signal-corporation/smartsiren-platinum-series/smartsiren-platinum-series_software-manual_3807149063.webp)
Configuring the Siren
63
SmartSiren Platinum Series
Assigning Siren Functions to Slide Switch 1–3
The control of siren tones, rather than the tones themselves, are selectable functions for the
Slide
Switch
. One option is
Siren Dependent Enabled
, which restricts siren activation to the slide switch
position you select. For example, if you press a button that is assigned a siren tone, the tone only
activates when you place the slide switch in the position that is
Siren Dependent Enabled
.
The
Horn Ring Transfer
option enables the driver to step through each
Siren Function
assigned to
the
Horn Ring
in the
Button Configuration Module
with each press of the horn button on the steering
wheel. Functions can include siren tones, such as
Yelp
and
Wail
,
Radio
rebroadcast through the siren
speakers, and
Public Address
, which transmits the operator’s voice through the microphone to the
siren speakers.
To assign siren functions to a slide switch button:
1.
Click a
Slide Switch
button.
NO
TE
Button Function Limits
The functions for all buttons (except
Slide Switch 3
, which accepts a limit of 20)
are limited to a maximum of 10.
2.
If the
Siren
pane is not in front of the other
Device Selection
panes, click the
Siren
tab.
3.
Select
Siren Dependent
or
Horn Ring Transfer
or both.
NO
TE
Button Control for the Slide Switch
The
Button Control Module
is unavailable for the
Slide Switch
because each
switch position acts as a momentary button.
Содержание SmartSiren Platinum Series
Страница 1: ...Control Pad Configuration Software Manual 2562418C REV C 411 Printed in U S A...
Страница 6: ...6...