SETTINGS
• Press PARAM2
• Press PARAM2 to return
Specific turning of each stage of parameter equaliza on, a er enter, you
can rotate PARAM1 to select filter type, you can rotate high and low
Chevron/Bell/high and low pass/all pass/notch, etc; rotate PARAM1
naviga on key to enter specific parameter adjustment, PARAM2=gain ,
PARAM3=Q value, frequency and so on.
• Press PARAM1
• Rotate PARAM2 to adjust the frequency to 5600Hz, use PARAM3 to fine
tune to 5606Hz
• Rotate the PARAM1 to select PEQ1
• Press the Edit bu on of Output 2
• Rotate PARAM3 to the right to select All Ps2 filter
• Con nue to rotate the PARAM1 selec on frequency adjustment to the
right
• Complete return
• Rotate PARAM1 right to adjusts the Q value
PEQ 1-8
PARAM. 3
CH-2 PEQ - 01
E / N=ON Type=BELL
CH-2 PEQ - 01
E / N=ON Type=AllPs2
Turning
Types include: BELL, HiShv1, HiShv2, HiShvQ,LoShv1,LoShv2, LoShvQ,
LP1st, LP2end, LP Q, HP 1st, HP 2nd, HP Q, Notch, AllPs1, AllPs2.
PARAM. 1
PARAM. 2
PARAM. 3
PARAM. 1
PARAM. 3
CH-2 PEQ - 01
E / N = ON Type = AllPs2
CH-2 PEQ - 01
Frequency = 31 Hz
CH-2 PEQ - 01
Frequency = 5600 Hz
CH-2 PEQ - 01
Frequency = 5606 Hz
CH-2 PEQ - 01
Gain = 0.0dB Q = 2.9
CH-2 PEQ - 01
Frequency = 31 Hz
CH-2 PEQ - 01
Frequency = 5600 Hz
CH-2 PEQ - 01
Frequency = 5606 Hz
CH-2 PEQ - 01
Gain = 0.0dB Q = 2.9
CH-2 PEQ - 01
Gain = 0.0 dB Q = 4.80
Turning
Turning
Turning
Turning
Turning
The output matrix allows the user to mix output channel signal to any
physical output channel in any ra o. The knob PARAM1 selects the source
and the PARAM3 adhusts the gain amount, which can be adjusted from -30
to 0dB.
• Click the edit bu on below output 1
For example, to mix output channel 1.2 to physical output 2, you need to do
the following:
• Rotate PARAM3 to adjust the gain to 0dB
• Click the EDIT bu on below output 2 and it will automa cally appear on
the CH2 rou ng interface
• Rotate PARAM1 to select output channel 2
• Rotate PARAM1 to select output channel 1
• Rotate PARAM3 to adjust the gain to 0dB finish
OUTPUT MATRIX
• Click PARAM2 to return
• Rotate PARAM1 key to the end of CH1 rou ng
NAVIG. / PARAM. 1
PARAM. 2
PARAM. 3
ENTER
ESC
UTILITY
DIGITAL LOUDSPEAKER MANAGEMENT
PARAM. 1
PARAM. 2
CH-1 Routing
1:0dB 2:OFF 3:OFF 4:OFF
CH-1 Routing
OUT1=ON Gain=0dB
CH-1 Routing
OUT2=OFF Gain=0dB
CH-1 Routing
OUT2=ON Gain=0dB
CH-1 Routing
1:0dB 2:0dB 3:OFF 4:OFF
CH-1 Routing
OUT1=ON Gain=0dB
CH-1 Routing
OUT2=OFF Gain=0dB
CH-1 Routing
OUT2=ON Gain=0dB
CH-1 Routing
1:0dB 2:0dB 3:OFF 4:OFF
CH-2 Routing
1:OFF 2:0dB 3:OFF 4:OFF
Turning
Turning
ENTER
PUSH
PUSH
PUSH
PARAM2
EDIT CH2
19
