SETTINGS
Only the IP Address is displayed here and the default is automa c
acquisi on and the real address will be displayed a er the connec on is
successful. It cannot be modified on the panel.
IP ADDRESS
NETWORK UTILITY
IP Address
IP Address
IP Addr = 000.000.000.000
ENTER
PUSH
The display is 255.255.255.0 which is only for display and cannot be
modified on the panel.
SUBNET MASK
NETWORK UTILITY
Subnet Mask
Subnet Mask
SubMask = 000.000.000.000
ENTER
PUSH
GATEWAY
Only for display, if you need to modify, you need to use the so ware to
modify online
NETWORK UTILITY:
Gateway
Gateway
Gatway = 000.000.000.000
LAN MODE
The LAN mode defaults to DHCP and the panel is only used as a display. It
can be modified to DHCP or a fixed IP address through so ware. When the
number of devices exceeds a certain number, that is, there are too many
DHCP servers in the LAN, network conges on may occur, so it is
recommended to >5 pcs processors; when connec ng at the same me use
the fixed IP method to connect.
NETWORK UTILITY:
LAN Mode
LAN Mode
Mode = DHCP
Click the EDIT bu on below the processor level meter to edit the
processing module of the input channel, long press to mute the current
channel.
SETTING OF INPUT CHANNEL
Edit input channel
The level meter of the input channel shows the pre-fader level, that is, it is
not affected by mute; the level meter of the output channel shows the post-
fader level and the level is not displayed a er the mute.
Click the edit bu on and the first item displayed is the channel name edit.
CHANNEL NAME EDITING
CH - A Name
Name = CH - A
ENTER
PUSH
PARAM. 3
PARAM. 2
PARAM. 3
PARAM. 3
Turning
Turning
Turning
Turning
The default display, if you need to modify, please follow the following
order:
• Click PARAM1 to confirm
• Rotate PARAM3 to the right to select characters
• Rotate PARAM2 to modify the character posi on and PARAM3 to select
the character ; the maximum allowable 6 characters.
• Rotate PARAM2 to the right to select the edit character posi on
• Click the Edit bu on to edit the channel
• Click PARAM1 to save a er modifica on
CH - A Name
Name = CH - A
CH - A Name
Name = PH - A
CH - A Name
Name = PH - A
CH - A Name
Name = PA - A
CH - A Name
Name = CH - A
CH - A Name
Name = PH - A
CH - A Name
Name = PH - A
CH - A Name
Name = PA - A
CH - A Name
Name = PA - L
11
