Fazzini FM5000C, Руководство пользователя

Страница: 18 / 162

3-1
FM5000C - FM5000PLUS
Maternal/Fetal Monitor
User Manual
Chapter 3 Installation
3.1 Unpack and Check
Carefully unpack monitor and accessories from the box, and save the packaging materials for later transport
or storage. Please check the accessories according to the packing list. Check if there is any mechanical damage.
Check all the external wires and connect accessories for test. If there is any question, please contact our sales
department or agency immediately.
3.2 Connect the AC Power Cord
Before connecting the power cord, confirm that the AC power supply meets the following specifications:
100-240V
～
, 50Hz/60Hz.
Use the power cord provided along with the monitor, and connect the power plug to the grounded
three-phase socket.
Note

To ensure the monitor’s safe operation, please only use the accessories (like FHR transducer)
and consumable materials provided or designated by Our company.

Please connect Our company equipment to the monitor only. If you connect any other electrical
equipment or device to the monitor, there could be safety problems caused by superimposed
leakage current.

Plug the power cord to the dedicated hospital socket.

Please charge the battery after the transport or storage of the monitor. Otherwise, if you turn
on the monitor without connecting it to the AC power supply, the battery power may not support
its normal operation. The battery will be charged when the AC power supply is
connected, whether you turn on the monitor or not.
3.3 Turn on the Monitor
Press the power on/off switch on the front panel and the system begains self-test. The physiological alarm
lamp and technical alarm lamp turn red and blue respectively, and then turn yellow and off respectively. The
system will enter the main screen and gives a beep at the same time after showing the company logo and
loading configuration files.