2-32
Storage Screen
2-9-7 Trigger
channel
Sets the target output when the trigger for starting storage is set.
Storage starts once the selected output meets the necessary conditions.
Options: Ch1 / Ch2 / Ch3 / Ch4
Default value: Ch1
2-9-8 Start
position
6SHFL¿HVE\KRZPXFKWKHVWDUWRIVWRUDJHVKRXOGEHVKLIWHGZKHQWKHVWDUWFRQGLWLRQLVVDWLV¿HG
The unit is the number of samplings.
3RVLWLYHYDOXH 'HOD\VE\WKHVSHFL¿HGQXPEHURIVDPSOLQJVDQGWKHQVWDUWVVWRUDJH'HOD\WULJJHU
³´ 6WDUWVVWRUDJHWKHLQVWDQWWKHFRQGLWLRQLVVDWLV¿HG
1HJDWLYHYDOXH %DFNVXSE\WKHVSHFL¿HGQXPEHURIVDPSOLQJVDQGWKHQVWDUWVVWRUDJH3UHWULJJHU
Input range: ±50000
Default value: –300
2-9-9 Repeat
Sets the operation to perform after the storage operation has been performed for the number of data items
set under “Quota.”
OFF: Sets “Status” to “Stopped” after the storage operation completes.
ON: Sets “Status” to “Trigger standby” after the storage operation completes.
MEMO
When “Repeat” is set to ON, the CDX Series will resume storage operation immediately if the trigger conditions are met
DIWHUWKHVWRUDJHRSHUDWLRQKDV¿QLVKHG
2-9-10 Stored Data
Displays the details of the most recent storage data as a waveform.
2-9-11 Storaged data list
Displays the saved (stored) data as a list. The most recent data is displayed at the bottom of the list.
&OLFNWKH¿OHQDPHWKHSDUWGLVSOD\HGZLWKWKHH[WHQVLRQFVYWRGRZQORDGWKDW¿OHLPPHGLDWHO\
Delete All: Deletes all the data saved (stored) on the unit.
Ramco - Optex FA Divsion
www.Optex-Ramco.com
Got Questions? 1-800-280-6933
