2-23
1
2
W
eb Settings Screen and Function Details
I/O Setting Screen
2-6-11 Off delay
Sets the time from when the output turns ON until the output turns OFF when the measured value falls below
the threshold. Ensuring that the output always lasts the same length of time will prevent problems resulting
from situations where detection is impossible because the ON time is too short.
ON
OFF
(2)
(1)
Upper
limit
Measurement value
Shorter than the specified time
(1) When the measured value remains outside the range from when the measured value exceeds the
threshold until after the Off delay time has elapsed
Ö
Output is turned OFF.
(2) When the measured value remains within the range from when the measured value falls outside the range
until after the Off delay time has elapsed
Ö
Output is not turned OFF.
,QSXWUDQJH WR>PVHF@
Default value: 0
2-6-12 One shot
When this setting is turned ON, output will be set to ON only for the designated time once the conditions for
turning output ON are met, and then turn OFF afterward.
Output time will be set by the “Off delay” time.
2-6-13 Alarm
6SHFL¿HVKRZWKHPHDVXUHGYDOXHVKRXOGEHGLVSOD\HGZKHQPHDVXUHPHQWLVQRWSRVVLEOH
&ODPS6KRZVDVSHFL¿HGYDOXH
Clamp value
Areas where measurement is not possible, such as holes
Actual
displacement
Measurement
results
Ramco - Optex FA Divsion
www.Optex-Ramco.com
Got Questions? 1-800-280-6933
