Fastus CDX Series, Руководство пользователя

Страница: 64 / 92

4-4
List of Commands for Reading/Writing Settings/Measured Values
Legend table
Note Parameter Name Command Class
R/W 0x0C10 Sampling period 0x00: 12.5 Unit: μsec
R: Read only
R/W: Read/write possible
Command name Supplementary explanation
(if applicable)
Command (2 bytes, hexadecimal form)
Individual parameters, formats,
or initial values for a command
4-2-1 Acquiring measured results
„
Sensor status/measurement result
Class Command Name Parameter Note
R 0x0DA0 Channel 1 output status *1
R 0x0DA4 Channel 2 output status *1
R 0x0DA8 Channel 3 output status *1
R 0x0DAC Channel 4 output status *1
R 0x01F4 Sensor status output *2
(Not used) (Not used) (Not used) (Not used) (Not used) (Not used)
HI output
GO output
LO output
(Not used) (Not used)
Hold ON
Zero set ON
(Not used)
ON when measurement is not possible
Control input/output status (ON/OFF)
Channel usage
(Not used)
ON when the laser is emitted
ON when storage file area is full
ON when precision timesync is in operation
On for alarm status
(Not used) (Not used)
Input terminal status
(Not used) (Not used) (Not used) (Not used)
Ch4 control input/output Ch3 control input/output Ch2 control input/output Ch1 control input/output
(Not used) (Not used) (Not used) (Not used) (Not used)
Ch1 HI output
Ch1 GO output
Ch1 LO output
(Not used) (Not used)
Ch1 hold ON
Ch1 zero set ON
(Not used)
ON when measurement for Ch1 is not possible
Ch1 control input/output status (ON/OFF)
(Usually ON)
32
…
…
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
32 31 30 29 28 27 26 25 24 23 22 21 20
Bit
*1: Explanation of bits
*2: Explanation of bits
19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Bit
Ramco - Optex FA Divsion www.Optex-Ramco.com Got Questions? 1-800-280-6933