Fastech Ezi-Step II Plus-E, Руководство пользователя

Страница: 57 / 68

www.fastech.co.kr
57
Parameter
※ 1) Only jog speed by input is applied..
2) Since JOG0 ~ JOG2 are used in common with PT5 ~ 7, the
number of Position Table can be limited when using the above
function..
3) After Jog0 ~ Jog2 is input, it operates normally when Jog
move command by signal is input.
ON OFF ON 38th parameter
ON ON OFF 39th parameter
ON ON ON 40th parameter
31
~37
Jog Speed1~Jog Speed7:
Set Jog speed which is extended according to input signal Jog0,
Jog1, Jog2.
pps
1 500,000 5000
38
Use Motion Queue:
If another move command is received before the move command is
completed, the current move command is executed and the next
move command is executed.
♦
0 : Motion Queue Use feature
♦
1 : Motion Queue Feature off
(Return error (0x85) if another move is received during the move)
※
Move commands are only available for Incremental / Absolute
commands. If more than one command is received, only one is
executed and other commands return error.
0 1 0
39
Disconnection Option Code:
This function is used to stop the movement command when the
communication end or communication cable disconnection is
issued while the movement command is being executed..
♦
0 (None) : Perform move command
♦
1 (Stop) : Deceleration stop
♦ 2
(E-Stop) : Quick stop
♦
3 (Stop&STEP Off) : After deceleration stop STEP Off
♦
4 (E-Stop&STEP Off) : After a quick stop STEP Off
※
Only available when communication is connected via TCP.
GUI program connection termination does not apply to the above
function.
0 4 0
40
Communication Timeout:
This parameter sets the timeout time for communication..
※
If timeout occurs, it executes the function set in parameter 42.
msec
100 60,000 100