Fastech Ezi-Step II Plus-E, Руководство пользователя

Страница: 56 / 68

www.fastech.co.kr
Parameter
56
2.7[A], set value is not increased as much as set-up, even
increasing the set value.
27
Stop Current:
Stop Current is meaning of motor current which is automatically set
after 0.1 second since motor stop. This parameter is using to
decrease the temperature when motor stopped long- time. It also
can be increased the motor temperature in case set-up more than
60%.
*10[%] 20
10 5
28
Encoder Multiply:
Sets the multiplication for the input of the external encoder.
value Pulse / rotation
0 Do not use
1 *1
2 *2
3 *4
0 3 3
29
Encoder Direction:
Set count direction of encoder.
♦
0 : CW (Count increases when CW is driven)
♦
1 : CCW (Count increases when CCW is driven)
0 1 0
30
Jog EXT FUNC USE:
It is used to change Jog movement command by input signal to
other speed than setting speed in parameter 6.
♦
0 : Jog Disable speed expansion
♦
1 : Jog Enable speed expansion
In addition, seven speeds can be selected, and the speed selection
is determined by the input signals Jog0, Jog1, and Jog2.
Jog2 Jog1 Jog0 Set speed
OFF OFF OFF 6th parameter
OFF OFF ON 34th parameter
OFF ON OFF 35th parameter
OFF ON ON 36th parameter
ON OFF OFF 37th parameter
0 1 0