Fastec IL3, Руководство оператора

Страница: 67 / 107

IL3 User’s Guide
11S-3002B
page 59
You may jump to the beginning of the clip (|<); to the end (>|) or to the Trigger frame (T). You may
also move to any frame by editing the Current Frame box, or by moving the slider beneath it.
The Playback Frame Rate may box may be edited directly or controlled via slider. The Playback Rate
governs the speed at which the clip is played back both forward and reverse.
The skip forward >> and reverse << buttons skip at 1/10th the
Playback Frame Rate. If you set the Playback Rate at 30, the >>
and << buttons will skip forward or back 3 frames; if you set it to
300, they will skip 30, etc.
Video clips may be saved to mass storage devices attached to or
installed in the camera (SD Card, SSD, or USB Drive).
To save a video clip:
1. Adjust the Clipping Range (edit the boxes or move the
sliders) to include the portion of the clip you wish to save.
2. Use the “Use Camera Name” and/or “Use Tag Label” check
boxes and the Tag Label edit box to set up the file name
prefix you wish to use.
3. Click on the File Type bar (labeled “AVI” in “Figure 6-13:
Video Review Tab”) to select the file type.
4. Select or deselect “Use Raw Format.” This check box will be
active or grayed depending on the bit depth recorded and
the file type selected.
Please refer to “Application Note 6: Choosing an Image File
Format” on page 76 for more details.
5. Select the destination drive using the “SD Card,” “SSD,” and
“USB Drive” radio buttons.
6. Click on “Save Partition.”
A Progress Bar will appear beneath the image window
showing the download status. When finished, an information window as in “Figure 6-14: Download
Information Box” will appear.
Figure 6-13: Video Review Tab
Figure 6-14: Download Information Box