IL3 User’s Guide
11S-3002B
page 93
Figure 8-8: Contents of Update SD Card
Figure 8-9: SD Card Restorer Messages
Alternate Update Methods
Update from using the Power Button:
1. Follow #s 1-7 on the previous page.
2. Power down the IL3.
3. Press and hold the ON/OFF button while applying
power to the IL3. You may release the button as
soon as you see the LEDs flashing on the IL3.
4. Once the IL3 is booted, follow steps 9-12 on the
previous page.
Restoring the SD Card
The SD card you have used for the camera update now
contains the files and folders listed in Figure 8-8. Refer
to the TS3_Release_Notes file for information about the
update.
The format of the SD Card has been changed and now
there is very little (35MB) accessible space left.
To Restore the SD Card:
1. Run card_restorer.exe from the SD Card.
2. You will see a message box asking if you wish to re-
partition and erase the SD card. Click on “Yes.”
3. The next message box will tell you that the process
will take a few moments. Click on “OK.”
4. Next, you will see a command window open and see
some text scrolling by.
5. Finally, you will see a message box saying
“Reformatting is now complete!”
Содержание IL3
Страница 1: ...IL3TM High Speed Camera Operator s Manual 2013 9 110S 3002B...
Страница 71: ...IL3 User s Guide 11S 3002B page 63 Figure 7 4 High Mid and Low 8 Bits of the same Image...
Страница 102: ...IL3 User s Guide page 94 11S 3002B Appendix J Physical Measurements Figure 8 10 Physical Measurements...